Project Scope: Rabotec was contracted to supply labour for the maintenance of the Gold Process Plant. The skilled labour supplied includes Mechanical and Electrical Engineers, shutdown crew, artisans, assay technicians among others. Rabotec also carry out corrosion control project of the plant which includes sandblasting and painting.
Project Date: February 2023 – January 2024
Project Scope: Construction of certain aspects of the stage 7 Raise of the TSF, Phase 1 Area 1. Rabotec constructed the TSF from Phase 1, raise to throughout to the current Stage. The scope of work includes grounds preparation, removal of top soil, rockfill, Geomembrane rubber lining, etc.
Project Year: February 2023 – January 2024
Project Scope: Hauling of Gold Ore from Esaase pit to Obotan Processing Plant
Hauling of waste
Project Date: April 2023 to July 2023
Project Scope: Construction of water abstraction pipeline and installation of valves
Project Date: March 2023 to June 2023
Project Scope: Earthworks preparations for the platforms for the mining service areas, process plant areas
heap leach pad and pond areas
Topsoil stripping and disposal
Project Date: December 2022 to March 2023
Project Scope: Community road diversion upgrade and construction of landfill site
Project Date: May 2023 to August 2023
Project Scope: Rental of 2 Vibrator Compactor CAT CS76 10ton, 6 Tipper trucks 40ton and 1 Grader CAT 143H
Client: Marampa Mines
Project Year: 2020-2021
Location: Marampa, Sierra Leone
Project Scope: The scope of the ROM Pad Management project consisted of the following: Managing and mining of raw unprocessed or uncrushed material in its natural state obtained after blasting or digging from the mineralised zone of a lease area.
Client: Marampa Mines
Project Year: 2020-2021
Location: Marampa, Sierra Leone
Project Scope: The scope of the Plant Maintenance and Rehabilitation project consisted of the following: Designing and construction of landforms as well as the establishment of sustainable ecosystems or alternative vegetation, depending upon desired post-operational land use and the prevention of pollution of the surrounding environment.
Project Year: 2020-2021
Project Scope:Structural steelworks, mechanical equipment installation, supply and installation of piping, plateworks and valves.
Client: Asanko Gold
Project Year: 2019-2020
Location: Obotan Mine, Ghana
Project Scope: Scope of Maintenance of HDPE Pipelines project consisted of the following: Maintenance of HDPE pipe which is a type of flexible plastic pipe used for fluid and gas transfer and is made from thermoplastic HDPE (high-density polyethylene). HDPE pipe is used across the globe for applications such as water mains, gas mains, sewer mains, slurry transfer lines, rural irrigation, fire system supply lines, electrical and communications conduit, and drainage pipes.
Client: Prestea Sankofa Goldfields Limited
Project Year: 2019-2020
Location: Prestea, Ghana
Project Scope: Scope of TSF Stage project consisted of the following: Construction of Tailings which consist of ground rock, unrecoverable and uneconomic metals, chemicals, organic matter and effluent from the process used to extract the desired products from the ore. Materials were loaded, hauled, placed and compacted to raise the outer TSF walls and decant structure.
Client: Persus Mines
Project Year: 2019-2020
Location: Ayanfuri, Ghana
Project Scope: The scope of the Plant Maintenance project consisted of the following: Planning a set of activities that are necessary to keep machinery, parts & types of equipment in good operating conditions, and to avoid production stoppage and loss.
Client: Asanko Gold Mine
Project Year: 2018
Location: Esaase, Ghana
Project Scope: Scope of Ore Haulage Project consisted of the following: This project involved haulage of tones of crushed ore on public roads in Esaase. To support the operation, a temporary workshop was established along the haul route for maintenance work.
Client: Asanko Gold
Project Year: 2018
Location: Obotan Mine, Ghana
Project Scope: Scope of TSF Stage 5 Raise project consisted of the following: Construction of Tailings which are the left-over materials from the processing of mined ore. Materials were loaded, hauled, placed and compacted to raise the outer TSF walls and decant structure.
Client: Asanko Gold Mine
Project Year: 2018
Location: Obotan Mine, Ghana
Project Description: Corrosion is a worldwide crucial problem that strongly affects natural and industrial environments. Today, we have full control over the corrosion and do regular plant maintenance.